NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I agree

Model 300

Semi-automatic turntable stretch wrapper or pallet wrapper

Semi-automatic stretch wrapper: detect pallet's height while making an optimized wrapping compared to a manual wrapping. At the end of the cycle they require the presence of an operator to cut the film and remove the pallet. The load is introduced and positioned on the turntable. Then, the turntable begins to turn at the speed selected depending on the wrapping cycle. Finally, the turntable turns the whole cycle until the final step when the film is cut manually.

Technical features

  • EAR-FLAP® profile.
  • Production (as operator and load): up to 20 pallets/hour.
  • PLC controlled, with display control panel.
  • Hinged mast.
  • Turntable with progressive start, stop in position and variable speed.
  • Adjustable mechanical film brake with foot trapping detector.
  • Automatic load height detection by photocell.
  • Turntable dimensions: Ø1.650 mm and 10 mm thickness.
  • 10 wrapping programs, descriptive images.
  • Special mode for applying protective corners.
  • Wrapping cycles counter.
  • Independently adjustable top & bottom reinforcement wraps.
  • Transmission guide carriage reel holder and chain platform.
  • Reinforcement wraps at any point in the cycle.
  • Ergonomically designed control panel.
  • Power supply: based on the country of destination.
  • Installed power: 1 Kw.

Standard pallet features (others on demand)

  • Type of wrapping: Vertical.
  • Maximum height: Up to 2.400 mm (consult about other heights).
  • Maximum dimensions pallet and load: 1.200 x 1.100 mm (consult about other dimensions).
  • Maximum weight: 2.000 kg.

Coil specifications

  • PE sheet.
  • Width: 500mm.
  • Thickness: Up to 50 microns.


  • Stainless steel 430, 304.
  • Explosion proof.
  • Subzero temperatures.


  • Special heights: 2.800 mm, 3.000 mm.
  • Special turntables: Ø 2.000 mm, Ø 2.400 mm, Ø 3.000 mm.
  • Special weights: 3.000 Kg.


  1. Turntable accessing ramp.
  2. Embedding frame.
  3. Scale with display.
  4. Direct film brake.
  5. Mechanical film brake (std.).
  6. Electromagnetic film brake.
  7. Powered film pre-stretching with anti-entanglement (200%, 300%,400%).
  8. Powered film pre-stretching with anti-entanglement with roping system.
  9. Twin film reel-holder.
  10. Powered top platen: round or square base.
  11. Special top holder for flat loads.
  12. Load detection options: ultrasounds.
  13. Cycle start options: Remote control, pedal and button with stand.

“A la carte” machine

Free quotation